Description
Soundco S518 Female TRS Connector is an installation terminal for entering various types of TRS plugs into audio devices or installing
in a speaker cabinet to connect audio cables from a power amplifier or power mixer. The body of this connector is made of metal, the plug
input has a toggle designed to lock the ts plug to prevent the connector from coming out momentarily due to the bass sound in
the speaker cabinet.
Other specifications of Soundco S518 Female TRS Connector:
To connect speaker wires inside a cabinet or enclosure to a panel-mount TRS jack with three terminals labeled 1, 2, and 3, note that this is a TRS (Tip-Ring-Sleeve) jack designed for receiving a male stereo plug.
For use in speaker cabinets or powered mixers:
-
Connect terminal 1 to the negative wire
-
Connect terminal 2 to the positive wire
-
Ignore terminal 3
For use as a stereo jack (e.g., for headphone output):
-
Solder the shield (ground) wire to terminal 1
-
Solder the red (right) wire to terminal 2
-
Solder the white (left) wire to terminal 3
To achieve clean and effective soldering, first strip the cable jacket and twist the wire strands tightly.
Then, solder each wire individually. Do the same for the connector terminals.
If you’re using 63% tin solder, there’s no need to use flux, as this jack provides an excellent surface for soldering.
Finally, place the pre-tinned wire onto the terminal and gently join both surfaces using the tip of the soldering iron.
