Description
Review: Soundco 3010 Microphone Cable
Soundco 3010 Microphone Cable is designed and produced suitable for the production and repair of all types of collar microphone cables. With this stereo cable, you can make a quality aux interface and get rid of low-quality pressed cables on the market that break after a few uses. This aux wire can be produced in any length and regardless of any noise or quality loss, because you are dealing with a specialized standard all-copper audio cable.
The use of Soundco 3010 Microphone Cable is recommended for communication under the work in hose pipes and PVC or duct for communication from the stage to the control room and other cases due to the low thickness of the outer coating. For example, if we want to pass several high-thick microphone cables from the stage of an amphitheater to the control room, the number of cables in the electrical pipes will definitely cause problems, and by using this microphone cable with a thin outer coating, we can make several paths. Transfer the cable in a tube without worrying about clogging the path.
Soundco 3010 Microphone Cable consists of 25 strands of shield with a thickness of 0.10 mm all copper woven around two white and red signal wires, consisting of 14 strands of 0.12 mm copper wire, coated with polyethylene insulation, bundled with copper foil and Finally, it is sheathed with a PVC cover with a final thickness of 3.2 mm.
This audio stereo cable has been tested at temperatures of -30 and +80 degrees, and therefore it can be used in any space and in any condition, regardless of the direction of the cable and its proximity to various facilities or outdoor use, its nature and softness And it maintains its high flexibility and does not get damaged. All strands of this cable are made of pure copper with standard certificate and test report of COI laboratory and are free of any impurities.
As you know, it is easy to distinguish the all-copper cable of the microphone from the various audio cables in the market, it is enough for you to scratch the wire strands with a cutter, and if you encounter a change in color and the copper color of the cable itself changes to white or black, You can be sure that you are dealing with a copper clad aluminum cable or a copper clad iron cable.
You can use this microphone cable to connect all kinds of active speakers to the power mixer, to connect a mobile phone to a car recorder, to produce and repair a lapel microphone, to connect the patch panels of the sleeping floor to the steering room, and with confidence that the impedance will not decrease and Install and operate your audio systems on long routes.
Soundco 3010 Microphone Cable is produced in a 200-meter circle with a marking of one meter and has Italian technology. It has the abbreviation OFC, which means oxygen-free copper, which includes high conductivity and does not contain any impurities.
Many car audio system installers and sellers are looking for a quality wire line to transmit the signal from the car recorder to the amplifier in order to have the best quality of their systems, this car signal cable can be one of the best choices for this task.
Other specifications of Soundco 3010 Microphone Cable:
- Number of cable strands: Shield 25 strands twisted around two signal wires 2 x 14 pure copper strands
- Length of cable loop: 200 exact meters with markings for each meter
- Outer cover thickness: 2 mm
Uses of Soundco 3010 Microphone Cable:
- Suitable for all types of handheld and collar microphones
- Preparation and production of aux wire
- Connecting patch panels from the stage to the control room
